Spring loaded fixed castor with mounting plate
A spring-loaded wheel is often used as a 5th wheel. This wheel is placed in the center and allows you to turn the structure more easily. This simple addition makes your trolley, pick cart or shelf cart a lot more maneuverable.
Application of fixed wheel
This high quality wheel with a diameter of 100 mm is equipped with a hard thermoplastic rim and wheel. Due to the softer rubber, the run-up resistance is higher than with a polypropylene tread, for example. This wheel is not suitable for environments with a lot of swarf or chemicals. This caster has a good cushioning tread and therefore it has good acoustic properties. The height from ground level to the top of the mounting plate is 124 mm.
This spring-loaded castor is equipped with a compression spring with adjustment screw to adjust the pressure to the ground. Depending on the load, the pressure can easily be increased or decreased.
This spring-loaded castor is suitable for:
- All 125 mm bolt hole castors ICW 4 padding plates (106-169-L66)
- All 130 mm plate castors ICW 7 padding plates (106-169-L66)
Properties | |
Wheel type | Fixed castor |
Wheel diameter (mm) | 100 |
Tyre | Thermoplastic |
Bearing | Single |
Rim | Polypropylene |
Overal height (mm) | 100 |
Plate dimensions (mm) | 70 x 79 |
Mounting hole distance (mm) | 61 x 52 |
Braked | No |
ESD | No |
Spring-loaded fixed castor with mounting plate 100mm, epukk
custom-made is our standard
Curious about the customisation possibilities? Get in touch our visit our experience center!
Visit our experience center